Potato Chip Gondola
A Potato Chip Gondola consists of three major components, a double
sided island gondola section, or a single sided wall gondola section,
with a standard shelf that can be mounted on the gondola in a down slope
configuration, and a wire front fence.
Gondola Sections consist of either a double sided island section
or a single sided wall section that is usually available in either a
three foot wide section or a four foot section. The double sided
gondola island sections are used as free standing displays usually placed
in the middle of the store. The single sided wall section is always
placed up against a wall for proper support. It is not recommended
to place a single sided wall section in the middle of a store merchandising
floor as it will not be supported at all and most likely will fall.
Gondola standard shelf is available in three foot wide and four foot
wide and available in depths of usually eight inches deep to thirty
deep. Most gondola shelf manufactures manufacture shelves so they
can bee configured on a gondola shelving system in a flat position,
a fifteen degree down slope and some heavy duty configurations even
a thirty degree down slope configuration making your potato chips more
visible and accessible to your customers.
Wire fencing and dividers are available in either three inch heights
and six inch heights. The six inch heights can be used for the
small potato chip bags and the six inch high fences for the larger party
size potato ship bags.
The Wire Potato Chip Shelf
provides an economical way to display a variety of snack products. When
combined with the Wire Utility Basket, ordered separately, allows cross
merchandising with dips and salsa.
The Wire Potato Chip Shelf has a load capacity of 30
lbs.
|
