A typical Gondola End Display is
suitably configured using a single sided section of gondola shelving that will
provides the stability needed when merchandising lots of products as the
shelving sections base shoes are directly connected to the uprights. |
Canopies can be created on either a Gondola
Island aisle or a Wall aisle using a standard upper shelf directly mounting a
wooden type canopy that is actually 2 pieces of firmly mounted together with two
types of canopy ends available. |
Wire End Panels for Gondola
The Gondola Wire Display Panel provides a valuable merchandising space at the
end of Gondola/Wall runs. This panel connects into the Gondola/Wall Basic
Upright on one side and attaches securely to the side of the shelves on the
opposite side.
This wire display panel utilizes a multi-purpose grid pattern which allows the
use of slatwall accessories, peg hooks and 3" o.c. wire grid accessories. The
Gondola Wire Display Panels are sold in pairs, one left hand and one right hand.
|
Wooden End Panels for Gondola
Wood End Panels - Radius Corners
The End Panels with Radius Corners are used to close off the ends of
Gondola/Wall runs. They add a trimmed look to the runs. Requires finish codes
for both exterior and interior panel material.
Wood End Panels - Square Corners
The End Panels with Square Corners are used to close off the ends of
Gondola/Wall runs. They add a trimmed look to the runs. Requires finish codes
for both exterior and interior panel material.
Edge work matches the exterior finish unless optional T-Mold is ordered. |
